Silicone Water Repellents / Water Repellent & Integral Water Proofing Admixture (SS WRP 10)

Category

Silicone Water Repellent

Water Repellent and Waterproofing admixture for masonry surfaces (SS WRP 10) is an aqueous solution of specially developed nano polymer, water dilutable used for the impregnation of mineral construction materials to make them water-repellent without significantly reducing water vapor permeability. SS WRP 10 provides its water repellent properties by deeply penetrating into pores and capillaries of cement

ParameterValue
AppearanceClear to slightly yellow
Specific Gravity1.25 – 1.4
Flash Point> 93°C
pH13
DiluentWater

Features

Admixture Benefits

Dosage: 0.1% – 0.3% per cement weight

Usable Life & Storage

When stored bellow 45°C in the original unopened containers, SS WRP 10 has a usable life of 2 yrs from the date of manufacturing

Select Language

50 Kg HDPE Drum
200 Kg Barrel

Catalyst: SS RHC

Used to accelerate cure. A typical catalyst concentration is 1 part catalyst to 10 parts of SS RH 100

APPLICATIONS

  • Surface and Internal treatment for concrete.
  • Making manufactured and natural stones water repellent.
  • Making aerated concrete water repellent.
  • Low - fired clay products immediately after they are made e.g. roof tiles, facing bricks, floor tiles, and flower pots.
  • Injection into buildings just above ground level to form a damp course.
  • Additive for clays, ceramics, starches, latex paints.
  • Primer for emulsion paints and plasters.
  • Mixed with sodium silicate for use as a binder in pigmented paints.
  • Gypsum & Gypsum based fibreboards.
  • It is also used to provide a barrier against rising damp.