Methyl Hydrogen Silicone Fluid

Widely used in finishing of cotton, hemp, silk, nylon & polyester fabrics.
Hydrophobic & moisture proofing of powders, glass, ceramic, leather, paper, metal, cement & marble.
Used as cross linker for addition type silicone rubber series.
Used as intermediate to silicone oil & alkyl based modified silicone oils.
Hydrophobing of plasterboard & plaster blocks.
Treatment for powders to make them free flowing, repel water & reduce caking.

Typical Values – Should not be considered as specifications.

• Essentially non-toxic
• Cures to give a durable film
• Controls cure times and temperatures
• Can be diluted in solvents, for better dispersion
• Effective at very low concentration

SS RH 100 is usually applied from dilute solution. Solutions are prepared by diluting solvents like acetone or methyl ethyl ketone and stirring the mixture gently until uniform. Extent of dilution depends on surface & properties required.

Coatings of SS RH 100 are heat cured to develop release / water repellency. Curing temperature range 120°C to 175°C. Higher temp = faster curing. Catalysts are often used to accelerate cure.

12 months in original container.

May evolve hydrogen gas in presence of catalyst & heat when in contact with “HO-R”.
Catalysts include: Bases, acids, heavy metal salts, polar ionic salts, transition metal salts.
Refer MSDS for safe handling.